Unleash the Hare! Sale - Sitewide Use code "HARE10" for 10% off your order at checkout!

Oops!

404 - PAGE NOT FOUND

The page you are looking for might have moved or is temporarily unavailable.

Go To Homepage

(!Topic Name="0-home-featured-products-2" !)

We are dedicated to providing our customers with the highest quality products and services in a timely and efficient manner.

Are you looking for:

British Brown Bess Musket W/ Bayonet Colonial Period - Non-Firing
The "British Brown Bess Musket" was one of the most renowned flintlock muskets ever produced. Introduced during the reign of Queen Anne (1702-1714), the gun was produced for over a century and was one of the most significant firearms of the American Revolutionary War. The Continental Army was armed with the weapon at the start of hostilities and, as the war progressed, many more were manufactured locally. The musket was still in British service at the time of the Napoleonic Wars in Europe (1799-1815). It weighed a hefty fifteen pounds with its bayonet and fired a ball three quarters of an inch in diameter! This Non Firing version of the British Brown Bess Rifle is accurately detailed and comes complete with its removable bayonet.

Note: The bayonet has an adjustment screw that allows you to orient the bayonet in any placement you desire.

Key Features:

Authentic Details
Non-fireable
For Decorative Purposes Only
Functional Lock Mechanism

Measurements:
Overall Length: 75 Inches
Barrel Length: 45 Inches
Blade Length: 17 Inches
Weight: 6 lbs. 8 oz.

This is a non-firing replica of the original. This piece replicates the original in size, weight and appearance, and functions much like the original. However, this replica cannot be made to fire or part interchanged.

It is the customer's responsibility to check all local laws pertaining to an item before you place your order. We are not responsible for packages confiscated due to Customs inspections.

Cannot Ship To: NJ, NYC, RI
Civil War Griswold & Gunnison Antique Grey Confederate Pistol Non Firing Replica
The Civil War Griswold & Gunnison Grey Frame Confederate Pistol is an iconic firearm from the American Civil War era.

Design: While the majority of Griswold & Gunnison pistols were known for their brass frames, there were also models with iron frames that were often finished in a gray color. The gray finish was typically achieved through bluing or other chemical processes used to protect the iron from rust and corrosion. These gray-finished pistols were commonly used by Confederate soldiers during the American Civil War. It features a six-shot, .36 caliber percussion revolver design.

Origin: The Griswold & Gunnison Pistol was manufactured by the Griswold & Gunnison Company, located in Griswoldville, Georgia. It was one of the many Confederate-produced firearms during the war, utilizing available resources and expertise within the Confederate states.

Historical Significance: The Griswold & Gunnison Pistol holds historical significance as a representation of Confederate firearm production during the Civil War. It showcases the resourcefulness of the Confederate states in producing their own weapons when faced with limited access to traditional manufacturing capabilities.

In summary, the Griswold & Gunnison Pistol is a Confederate-made revolver, which played a significant role in the Civil War. This M1860 Civil War Pistol Non Firing Replica in Antique Grey finish has the handling characteristics of the original, with functional lock and loading mechanisms.

Key Features:
Authentic Details
M1860 Pistol
Antique Gray Finish
Non-fireable
For Decorative Purposes Only
Functional Lock Mechanism

Measurements:
Overall Length: 13.75 Inches
Barrel Length: 7.25 Inches
Weight: 2 lbs. 2 oz.

This is a non-firing copy of the original. This piece replicates the original in size, weight and appearance, and functions much like the original. However, this replica cannot be made to fire or part interchanged.

It is the customer's responsibility to check all local laws pertaining to an item before you place your order.  We are not responsible for packages confiscated due to Customs inspections.

Cannot be shipped to  NJ, New York City (all 5 Boroughs), RI and Canada.
Medieval Aventail W/Leather Helm Attachment - Butted High Tensile Rings
The Aventail with leather helmet attachment is designed to fit Medieval Helmets. The Aventail, or Camail, was a curtain of chainmail attached to the base of a helmet (usually a bascinet) during the 14th and early 15th centuries.

This medieval aventail is constructed from butted round rings, stitched to a leather band. It is ready to be riveted into a helmet to upgrade it with the further protection of a mail aventail. The individual rings are 16 gauge in thickness and 9 mm in diameter.

Specifications:
Construction: Butted
Ring Type: Round Wire
Material: 16ga. High Tensile Steel
Finish: Natural
Ring Internal Diameter: 9mm
Length of Leather Band is approximately: 24 inches

Specs will vary slightly from piece to piece.
Crecy Sword, Hand Forged Blade, Full Tang, Battle Ready Medieval Sword
Crecy Medieval War Sword: The Battle of Crecy was one of the most decisive battles of the 100 Years War. After the battle of Sluys, Edward III landed in Normandy in July 1346 with about 10,000 men. The French pursued. Edward III decided to halt near Crecy in Normandy and to prepare for battle the next day.

However, the French vanguard made contact and started to attack without the benefit of a plan. The French made as many as 15 attacks, and the English checked each one in turn, primarily thanks to the English longbowmen. In the end, the French were decimated and the English had a decisive victory.

The Crecy is one type of sword that would have seen service on both sides during the 100 Years War.

Oakeshott describes the Type XVIa sword as having a long, tapering blade, broad at the hilt, with a sharp, often reinforced, point.

The Kingdom of Arms Crecy War sword is a fine example of a later period epee de guerre, or war sword, a refinement of the earlier XIIa in response to changes in the Armour of the period.

The blade is made from hand hammered 5160 carbon steel blade as the originals were made, full tang, heat treated and tempered as the originals, for a strong yet flexible blade that will hold a very sharp edge. Steel pommel and cross-guard. Wooden scabbard wrapped in leather.
 
Free Shipping: Continental U.S. standard ground.

Measurements:
Blade Length: 33''
Blade Edge: Sharp
Handle Length: 7-3/4''
Grip Length: 5-1/2''
Cross Guard: 8-1/4''
Weight: 2.13 lbs
P.O.B.: 4-1/2''' Below Hilt
Scabbard; Wood, stained and oiled dark with leather accents

Civil War Griswold & Gunnison Brass Frame Confederate Pistol Non Firing Replica
The Civil War Griswold & Gunnison Brass Frame Confederate Pistol is an iconic firearm from the American Civil War era.

Design: The Griswold & Gunnison Pistol is a Confederate-made firearm, known for its distinctive brass frame construction. It features a six-shot, .36 caliber percussion revolver design. The brass frame sets it apart from other contemporary revolvers and adds to its unique appearance.

Origin: The Griswold & Gunnison Pistol was manufactured by the Griswold & Gunnison Company, located in Griswoldville, Georgia. It was one of the many Confederate-produced firearms during the war, utilizing available resources and expertise within the Confederate states.

Historical Significance: The Griswold & Gunnison Pistol holds historical significance as a representation of Confederate firearm production during the Civil War. It showcases the resourcefulness of the Confederate states in producing their own weapons when faced with limited access to traditional manufacturing capabilities.

In summary, the Griswold & Gunnison Pistol is a Confederate-made revolver with a distinctive brass frame, which played a significant role in the Civil War. This M1860 Civil War Pistol Non Firing Replica in Brass has the handling characteristics of the original, with functional lock and loading mechanisms.

Key Features:
Authentic Details
M1860 Pistol
Brass Finish
Non-fireable
For Decorative Purposes Only
Functional Lock Mechanism

Measurements:
Overall Length: 13.75 Inches
Barrel Length: 7.25 Inches
Weight: 2.1 lbs.

This is a non-firing copy of the original. This piece replicates the original in size, weight and appearance, and functions much like the original. However, this replica cannot be made to fire or part interchanged.

It is the customer's responsibility to check all local laws pertaining to an item before you place your order.  We are not responsible for packages confiscated due to Customs inspections.

Cannot be shipped to New York City (all 5 Boroughs), NJ, RI and Canada.
Loading...
x
Chat service by BoldChat